Civil Engineering Association

EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete

This series EN 14488 ‘Testing sprayed concrete’ includes the following parts:
- Part 1: Sampling fresh and hardened concrete
- Part 2: Compressive strength of young sprayed concrete
- Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens
- Part 4: Bond strength of cores by direct tension
- Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens
- Part 6: Thickness of concrete on a substrate
- Part 7: Fibre content of fibre reinforced concrete

Part 2 specifies two methods from which an estimate of the in situ compressive strength of young hardened sprayed concrete can be made.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens

This part of European Standard specifies a method for the determination of the flexural (first peak, ultimate and residual) strength of beam specimens of hardened sprayed concrete.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-5:2006 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens

This part of European Standard specifies a method for the determination of the load/deflection response of aslab specimen in order to calculate the energy absorption capacity up to a specified deflection.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate

This standard describes methods for the determination of the thickness of sprayed concrete on a substrate after spraying. The results can also give an indication of the parallelism of the concrete to the substrate. The substrate may be rock, soil, concrete or other surface.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-7:2006 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete

This part of European Standard specifies a method for the determination of the fibre content of sprayed concrete from either a fresh or hardened (i.e. before or after set) concrete sample. Only the method using a fresh sample is appropriate with polymer fibres, while both types are applicable with steel fibres.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-1:2005 Testing sprayed concrete - Sampling fresh and hardened concrete

This European Standard specifies a method for obtaining samples of fresh or hardened (i.e. before or after
set) sprayed concrete, depending on the property to be measured and its associated test method.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488-4:2005 Part 4: Bond strength of cores by direct tension

This European Standard describes a means of determining the tensile bond between sprayed concrete and
substrate of concrete or rock tested in a laboratory as a direct tension test. Bond strength is defined as the
capacity to transfer tension between two layers. Bond strength is calculated as the ultimate tensile force
divided by the stressed cross-sectional area of a core, drilled out of a sprayed concrete layer together with a
portion of the substrate concrete or rock.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Made By CivilEA Post-Generator ver 2.0

EN 14488 all parts:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

New links for EN 14488 all parts

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1

EN 14488 all parts

***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

BS_EN_14488_1_2005
BS_EN_14488_2_2006
BS_EN_14488_3_2023
BS_EN_14488_4_2008
BS_EN_14488_5_2006
BS_EN_14488_6_2006
BS_EN_14488_7_2006

datagap

ir_71

ir_71

ir_71

ir_71

poolmand