Civil Engineering Association

Standard Number BS 8110-1:1997
Title Structural use of concrete. Code of practice for design and construction
Status Superseded, Withdrawn
Publication Date 15 March 1997
Withdrawn Date 16 April 2010
Replaced By BS EN 1992-1-1:2004
Replaces BS 8110:Part 1:1985
Amended By AMD13468 (TO BS8110-1 : 1997) AMD9882 AMD 16016 November 2005. AMD 17307 August 2007.
Supersedes Draft 00/108426 DC05/30135242 DC95/105430 DC
Descriptors Concretes, Construction materials, Buildings, Structures, Structural design, Loading, Reinforced concrete, Strength of materials, Framed structures, Beams, Slabs, Structural members, Shear stress, Columns, Walls, Stability, Stairs, Foundations, Reinforcement, Prestressed concrete, Precast concrete, Composite construction, Composition, Durability, Concrete mixes, Curing (concrete), Formwork, Finishes, Movement joints, Grouting

Note: This is the final BS8110 issued inlcuding all four admendments. Would think this is worth for collection even for non british based structural concrete designers. This standard has been around for 25 years and served many nations beyond UK in their developments.

To get the full package, you can get part 2 and 3 of BS8110 here


As you can see, this norm was replaced by BS EN 1992-1-1, but is usefull anyway!

Regards

BS 8110-1 1997 With Amd 2007

BS 8110-1: 1997: Structural use of concrete - Part 1: Code of practice for design and construction

This part of BS 8110 gives recommendations for the structural use of concrete in buildings and structures, excluding bridges and structural concrete made with high alumina cement. The recommendations for robustness have been prepared on the assumption that all load-bearing elements, e.g. slabs, columns and walls are of concrete. In a structure where concrete elements such as floor slabs are used in conjunction with load-bearing elements of other materials, similar principles are appropriate but, when adequate robustness is provided by other means, the ties recommended by this code may not be required.

---

MODERATOR NOTE:

Refer to post below for PART 2:

Refer to post below for PART 3:

---

BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction

A summary to this thread up to date (hope mod(s) can do some editing here). thanks in advance.

#2 dead link
#3 active link. full 3 parts updated with latest AMD. part 1 scanned file.
#4 active link. part 1 updated with latest AMD, preprint file.
#5 & 6 part 1 with only AMD up to year 2002.

special thanks to miquan for the great effort to update this thread.

BS 8110-1 1997: Structural use of concrete - Part 1: Code of practice for design and construction
(Incorporating Amendments Nos. 1, 2, 3 and 4)

This part of BS 8110 gives recommendations for the structural use of concrete in buildings and structures, excluding bridges and structural concrete made with high alumina cement. The recommendations for robustness have been prepared on the assumption that all load-bearing elements, e.g. slabs, columns and walls are of concrete. In a structure where concrete elements such as floor slabs are used in conjunction with load-bearing elements of other materials, similar principles are appropriate but, when adequate robustness is provided by other means, the ties recommended by this code may not be required.






Refer to post below for PART 2:

Refer to post below for PART 3: