EXACT EVALUATION OF THE LOCATION OF THE OPTIMUM TORSION AXIS

[asim99]

EXACT EVALUATION OF THE LOCATION OF THE OPTIMUM TORSION AXIS

Author: E. M. MARINO AND P. P. ROSSI | Size: 125 KB | Format: PDF | Quality: Unspecified | Publisher: E. M. MARINO AND P. P. ROSSI | Year: 2003 | pages: 14

The paper addresses the issue of the evaluation of a reference axis which in multistorey buildings can play the
same role as the elastic centre in one-storey schemes. In this regard the authors propose an improvement to the
procedure previously suggested by Makarios and Anastassiadis for the evaluation of the position of the optimum
torsion axis. The above-mentioned researchers based their evaluation on a parametric analysis of asymmetric
frame-wall systems and thus defined the location of the optimum torsion axis only approximately. The authors,
instead, face the problem from an analytical point of view and propose mathematical expressions that rigorously
define the position of the same axis. Some examples are finally reported aiming at comparing the two approaches
and highlighting the improvements brought by the rigorous approach to the approximate determination of the
location of the optimum torsion axis.

Code:

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6