04-14-2011, 01:11 PM
Hybrid Wood and Steel Details– Builder’s Guide
Author: NAHB Research Center | Size: 3.2 MB | Format: PDF | Publisher: PATH | Year: 2003 | pages: 124
The provisions of this publication apply to the construction of detached one- and two-family dwellings, townhouses, and other attached single-family dwellings in compliance with the general limitations of Table 2.1. The limitations are intended to define the appropriate use of this publication for most one- and two-family dwellings. The provisions of this document can be used for framing elements or components that meet the applicability limits of Table 2.1 but located in buildings that do not meet all the requirements of Table 2.1 provided that the nonconforming limits do not impact such framing element or component. The provisions of this document can also be extended to buildings and components of buildings that do not meet the applicability of Table 2.1 and for other types of buildings (other than residential buildings) provided that each provision is carefully reviewed by competent individual(s) to ensure its applicability. Using cold-formed steel and wood components with other construction materials in a single structure shall be in accordance with the applicable building code requirements for that material, the general limitations of Table 2.1, and the relevant provisions of this publication. An approved design shall be required for applications that do not meet the limitations of Table 2.1.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************