09-16-2010, 07:57 PM
There may be an error because concept will not let you use segmented beams either. Concept may just assume the there are a bunch of beams hanging out in mid air with no support. I.E. The beam must be connected to a girder or a column on each side.
I would suggest using columns at each end of the segmented beams, because concept is not designing the beams in the first place. It is only designing the slab. You can design the curved beam in another program or by hand.
I would suggest using columns at each end of the segmented beams, because concept is not designing the beams in the first place. It is only designing the slab. You can design the curved beam in another program or by hand.