<![CDATA[Civil Engineering Association

<![CDATA[Civil Engineering Association - AWS]]> https://forum.civilea.com/ Wed, 27 May 2026 14:18:45 +0000 MyBB <![CDATA[A5.22 / A5.22M: SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING]]> https://forum.civilea.com/showthread.php?tid=58485 Mon, 03 Feb 2025 08:02:15 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58485 A5.22/A5.22M:2024 - SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING ELECTRODES AND RODS

Classification and other requirements are specified for numerous grades of flux cored and metal cored stainless steel electrodes and rods. New classifications include a duplex alloy and three high carbon classifications not previously classified. New classifications also include all of the metal cored electrodes that are currently in A5.9/A5.9M. In the next revision of A5.9/A5.9M these metal cored electrodes will be deleted from that specification.

Designations for the flux cored electrodes and rods indicate the chemical composition of the weld metal, the position of welding, and the external shielding gas required (for those classifications for which one is required). Designations for the metal cored electrodes indicate the chemical composition of the weld metal only.

The requirements include general requirements, testing, and packaging. Annex A provides general application guidelines for individual alloys and other useful information about welding electrodes. ANSI Approved. approx. 70 pages. ISBN: 978-0-87171-800-6

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> A5.22/A5.22M:2024 - SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING ELECTRODES AND RODS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> <![CDATA[D10.4M-D10.4: GUIDE FOR WELDING AUSTENITIC STAINLESS STEEL PIPING AND TUBING]]> https://forum.civilea.com/showthread.php?tid=58483 Mon, 03 Feb 2025 07:56:36 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58483 D10.4M-D10.4-2023 GUIDE FOR WELDING AUSTENITIC STAINLESS STEEL PIPING AND TUBING

| Size: 8.82 MB| Format: PDF| Quality: Original preprint| Year: 2023

This document presents a detailed discussion of the metallurgical characteristics and weldability of many grades of austenitic stainless steel used in piping and tubing. The delta ferrite content as expressed by ferrite number (FN) is explained, and its importance in minimizing hot cracking is discussed. Several figures and tables illustrate recommended joint designs and procedures. Annex A presents information on the welding of high-carbon stainless steel cast pipe and fittings.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> D10.4M-D10.4-2023 GUIDE FOR WELDING AUSTENITIC STAINLESS STEEL PIPING AND TUBING

| Size: 8.82 MB| Format: PDF| Quality: Original preprint| Year: 2023

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> <![CDATA[AWS C2.19 / C2.19M]]> https://forum.civilea.com/showthread.php?tid=58482 Mon, 03 Feb 2025 07:52:11 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58482 AWS C2.19/C2.19M:2023

This specification covers thermal spray processes for original equipment manufacturers (OEMs) and the repair of machinery components.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> AWS C2.19/C2.19M:2023

This specification covers thermal spray processes for original equipment manufacturers (OEMs) and the repair of machinery components.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> <![CDATA[AWS D14.0/D14.0M: MACHINERY AND EQUIPMENT WELDING SPECIFICATION]]> https://forum.civilea.com/showthread.php?tid=58387 Tue, 24 Sep 2024 10:18:45 +0300 poolmand]]> https://forum.civilea.com/showthread.php?tid=58387 AWS D14.0/D14.0M:2024 - MACHINERY AND EQUIPMENT WELDING SPECIFICATION

This specification establishes design, manufacture, quality, inspection, and repair requirements for carbon, low-alloy, and alloy steel welded connections in machinery and equipment. It addresses topics including weld joint design, workmanship,
quality acceptance criteria, nondestructive examination methods (visual, radiographic, ultrasonic, magnetic particle, and liquid penetrant), repair of weld defects, and postweld heat treatment

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> AWS D14.0/D14.0M:2024 - MACHINERY AND EQUIPMENT WELDING SPECIFICATION

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.4

]]> <![CDATA[AWS API-M: STUDY GUIDE FOR API STANDARD 1104 WELDING OF PIPELINES AND RELATED FACILIT]]> https://forum.civilea.com/showthread.php?tid=58076 Sat, 27 Jan 2024 12:47:26 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58076 AWS API-M:2017
STUDY GUIDE FOR API STANDARD 1104 WELDING OF PIPELINES AND RELATED FACILITIES
21th Edition

This study guide contains information on the use of API Standard 1104, Twenty-First Edition, which will assist the student in learning how to use the standard as well as in preparing for code-related examinations. Material is provided for each of the 13 sections of the standard and Annexes A and B. Exercise questions and answers are provided for each section and annex, and additional practice tests are included at the end.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS API-M:2017
STUDY GUIDE FOR API STANDARD 1104 WELDING OF PIPELINES AND RELATED FACILITIES
21th Edition

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS RWPH: RESISTANCE WELDING POCKET HANDBOOK (RWMA)]]> https://forum.civilea.com/showthread.php?tid=58066 Mon, 22 Jan 2024 14:14:02 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58066 AWS RWPH:2011 RESISTANCE WELDING POCKET HANDBOOK (RWMA)

| Size: 1.61 MB| Format: PDF| Quality: Scanner| Year: 2011

Resistance Welding Pocket Handbook. This book contains basic information on resistance welding- important “do’s” and “don’ts”- common weld defects and their probable causes- various charts including sample weld schedules

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS RWPH:2011 RESISTANCE WELDING POCKET HANDBOOK (RWMA)

| Size: 1.61 MB| Format: PDF| Quality: Scanner| Year: 2011

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS J1.3/J1.3M: SPECIFICATION FOR MATERIALS USED IN RESISTANCE WELDING ELECTRODES]]> https://forum.civilea.com/showthread.php?tid=58065 Mon, 22 Jan 2024 14:10:19 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58065 J1.3/J1.3M: 2020 SPECIFICATION FOR MATERIALS USED IN RESISTANCE WELDING ELECTRODES AND TOOLING

| Size: 1.1 MB| Format: PDF| Quality: Scanner| Year: 2020

This standard specifies essential properties of materials used for resistance welding electrodes and related components, the common applications of these materials, and methods of conformance verification.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> J1.3/J1.3M: 2020 SPECIFICATION FOR MATERIALS USED IN RESISTANCE WELDING ELECTRODES AND TOOLING

| Size: 1.1 MB| Format: PDF| Quality: Scanner| Year: 2020

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS J1.2M/J1.2: GUIDE TO INSTALLATION AND MAINTENANCE OF RESISTANCE WELDING MACHINES]]> https://forum.civilea.com/showthread.php?tid=58064 Mon, 22 Jan 2024 14:08:15 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58064 AWS J1.2M/J1.2: 2016 GUIDE TO INSTALLATION AND MAINTENANCE OF RESISTANCE WELDING MACHINES (RWMA)

This guide provides general instructions for the installation, operation, and maintenance of common types of resistance welding equipment. Generic preventative maintenance schedules and equipment troubleshooting recommendations are provided as an overview of common weld qualification techniques and corrective actions to common weld conditions. ISBN: 9780871718914

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS J1.2M/J1.2: 2016 GUIDE TO INSTALLATION AND MAINTENANCE OF RESISTANCE WELDING MACHINES (RWMA)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS J1.1M/J1.1: SPECIFICATION FOR RESISTANCE WELDING CONTROLS]]> https://forum.civilea.com/showthread.php?tid=58063 Mon, 22 Jan 2024 14:05:46 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58063 AWS J1.1M/J1.1:2013 SPECIFICATION FOR RESISTANCE WELDING CONTROLS

This standard provides nomenclature pertaining to the design, construction, and programming of resistance welding controls. Standard calibration and performance parameters as well as labeling and documentation requirements are also outlined. The purpose is to promote standardization, safety, and proper application of resistance welding controls. This document replaces RWMA Bulletin 5. ISBN: 978-0-87171-842-6

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS J1.1M/J1.1:2013 SPECIFICATION FOR RESISTANCE WELDING CONTROLS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G2.5/G2.5M: GUIDE FOR THE FUSION WELDING OF ZIRCONIUM AND ZIRCONIUM ALLOYS]]> https://forum.civilea.com/showthread.php?tid=58062 Mon, 22 Jan 2024 14:03:34 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58062 AWS G2.5/G2.5M:2012 GUIDE FOR THE FUSION WELDING OF ZIRCONIUM AND ZIRCONIUM ALLOYS

The standard Guide for the Fusion Welding of Zirconium and Zirconium Alloys provides instructional guidance for the welding of zirconium and zirconium alloys. ISBN: 978-0-87171-802-0

This guide explains:
- processes
- equipment
- materials
- workshop practices
- joint preparation
- welding techniques
- tests, and the repair of defects.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G2.5/G2.5M:2012 GUIDE FOR THE FUSION WELDING OF ZIRCONIUM AND ZIRCONIUM ALLOYS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G2.4/G2.4M: GUIDE FOR THE FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS]]> https://forum.civilea.com/showthread.php?tid=58061 Mon, 22 Jan 2024 13:58:06 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58061 AWS G2.4/G2.4M:2021 - GUIDE FOR THE FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS

The standard Guide for the Fusion Welding of Titanium and Titanium Alloys provides instructional guidance for the
welding of titanium and titanium alloys. This guide explains processes, equipment, materials, workshop practices, joint
preparation, welding technique, tests, and the repair of discontinuities. ISBN: 978-1-64322-180-9

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G2.4/G2.4M:2021 - GUIDE FOR THE FUSION WELDING OF TITANIUM AND TITANIUM ALLOYS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G2.3M/G2.3: GUIDE FOR THE JOINING OF SOLID SOLUTION FOR AUSTENITIC STAINLESS STEE]]> https://forum.civilea.com/showthread.php?tid=58060 Mon, 22 Jan 2024 13:52:42 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58060 AWS G2.3M/G2.3:2019 GUIDE FOR THE JOINING OF SOLID SOLUTION FOR AUSTENITIC STAINLESS STEELS

This guide presents a description of solid solution austenitic stainless steels and the processes and procedures that can be used for the joining of these materials. This standard discusses the welding processes and welding parameters, qualifications, inspection and repair methods, cleaning, and safety considerations. Practical information has been included in the form of figures, tables, and graphs that should prove useful in determining capabilities and limitations in the joining of austenitic stainless steel. ISBN Print: 978-1-64322-016-1ISBN PDF: 978-1-64300-017-8

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G2.3M/G2.3:2019 GUIDE FOR THE JOINING OF SOLID SOLUTION FOR AUSTENITIC STAINLESS STEELS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G2.1M/G2.1: GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS]]> https://forum.civilea.com/showthread.php?tid=58059 Mon, 22 Jan 2024 13:50:23 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58059 AWS G2.1M/G2.1:2012 GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS

| Size: 1.77 MB| Format: PDF| Quality: Scanner | ISBN: 0871716410

The definitive guide to welding metals and alloys not covered by other standards. Learn the guidelines for welding different wrought nickel based alloys, including solidsolution and precipitation hardening alloys.

ANSI Approved. ISBN 0-87171-641-0

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G2.1M/G2.1:2012 GUIDE FOR THE JOINING OF WROUGHT NICKEL-BASED ALLOYS

| Size: 1.77 MB| Format: PDF| Quality: Scanner | ISBN: 0871716410

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G1.10M: GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATEDTOOL BU]]> https://forum.civilea.com/showthread.php?tid=58058 Mon, 22 Jan 2024 13:34:12 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58058 AWS G1.10M:2016 GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATEDTOOL BUTT THERMOPLASTIC WELDS

This standard lists and describes flaws and defects in hot gas, hot gas extrusion, heated tool butt fusion, socket fusion, electrofusion, and flow fusion welded joints in thermoplastics. Its intent is to make possible a generally valid evaluation giving consideration to graded quality requirements. This standard encompasses the classification, requirements, testing, evaluation, and acceptance of the welds. Details in recording engineering data are described. Tables illustrating cracks, voids, solid inclusions, lack of fusion, flaws and defects of shape, and other flaws and defects in thermoplastic welds are included. Flaw and defect features with descriptions and illustrations are compiled into tables to aid in the evaluation of welds. ISBN: 978-0-87171-884-6

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G1.10M:2016 GUIDE FOR THE EVALUATION OF HOT GAS, HOT GAS EXTRUSION, AND HEATEDTOOL BUTT THERMOPLASTIC WELDS

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> <![CDATA[AWS G1.6: SPECIFICATION FOR THE TRAINING, QUALIFICATION, AND COMPANY CERTIFICATION OF]]> https://forum.civilea.com/showthread.php?tid=58057 Mon, 22 Jan 2024 13:32:04 +0200 poolmand]]> https://forum.civilea.com/showthread.php?tid=58057 AWS G1.6:2022 - SPECIFICATION FOR THE TRAINING, QUALIFICATION, AND COMPANY CERTIFICATION OF THERMOPLASTIC WELDING INSPECTOR SPECIALISTS AND THERMOPLASTIC WELDING INSPECTOR ASSISTANTS

| Size: 542 KB| Format: PDF| Quality: Scanner| Year: 2022

This specification defines the requirements and program for an employer (company) to train, qualify, and company certify Thermoplastic Welding Inspector Specialists and Thermoplastic Welding Inspector Assistants to contract or industryspecific inspector standards. The program is developed as a written practice and controlled by an employer. The qualification requires documentation of experience, training, and satisfactory completion of an examination. The examination tests knowledge of welding processes, welding procedures, welder qualification, destructive testing, nondestructive testing, terms, definitions, symbols, reports, records, safety, and responsibility as specifically applied by the contract or industry standards applicable to the employer.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]> AWS G1.6:2022 - SPECIFICATION FOR THE TRAINING, QUALIFICATION, AND COMPANY CERTIFICATION OF THERMOPLASTIC WELDING INSPECTOR SPECIALISTS AND THERMOPLASTIC WELDING INSPECTOR ASSISTANTS

| Size: 542 KB| Format: PDF| Quality: Scanner| Year: 2022

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

]]>