BLUE BOOK - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Codes, Manual & Handbook (https://forum.civilea.com/forum-16.html) +---- Forum: British Standards (BS) (https://forum.civilea.com/forum-120.html) +---- Thread: BLUE BOOK (/thread-6933.html) |
BLUE BOOK - Nedian - 08-28-2009 BLUE BOOK of UBC 1997 Short description: The first edition of this Design Guide was published in 1985; it was revised in 1987 (2nd Edition), in 1992 (3rd Edition), in 1996 (4th Edition), in 1997 (5th edition) and in 2001 (6th edition). It is a basic working tool for users of BS 5950-1 Structural use of steelwork in building – Code of practice for design – Rolled and welded sections, which was first published in 1985, revised in 1990 and in 2000. This edition is a reprint of the 6th edition, in which the section range has been updated. The tables are dual titled with the BS designation as well as the Advance (open sections), Celsius® (hot finished hollow sections) or Hybox® (cold formed hollow sections) branding. The following structural sections are covered in this publication: • Universal beams, Universal columns, joists, bearing piles, parallel flange channels, and structural tees cut from Universal beams and Universal columns to BS 4-1 • ASB (asymmetric beams) Slimdek® beam produced by Corus (see Corus brochure, Advance™ sections, 09/2006)) • Equal and Unequal angles to BS EN 10056-1 • Hot-finished structural hollow sections to BS EN 10210-2 • Cold-formed structural hollow sections to BS EN 10219-2 Section ranges listed are intended to be in line with sections that are readily available at the time of printing. Some sections, which are readily available but not listed in the above standards, are also included; these sections are designated by “+” in the tables. The editorial work for the 7th Edition was carried out by Miss E Nunez Moreno, based on the 6th edition produced by Mr A Way and Mr A S Malik, with technical assistance from Mr C M King of the SCI and Mr J C Taylor, formerly of the SCI. The 6th edition was coordinated by Mr D G Brown, of the SCI, and Mr P J Williams, formerly of the BCSA. This publication has been jointly funded by SCI and BCSA. Acknowledgement is also given to Corus for its support for the work leading to the preparation of the initial formulae on which the capacity tables are based. Screenshot: Download Link: Code: *************************************** Moderator note: Thread moved from request section. (G) RE: BLUE BOOK - ahphuah - 09-09-2009 Code: *************************************** Here is the blue book, most updated version, i.e. 7th ed. Fully decryped and printable. RE: BLUE BOOK - noelda2 - 10-05-2009 Code: *************************************** I hope this will keep you happy...... blue book - preceptor - 12-02-2009 1999 Recommended Lateral Force Requirements and Commentary (SEAOC Blue Book)
Description From the Structural Engineers Association of California (SEAOC) Recommended Lateral Force Requirements and Commentary is also known as the SEAOC Blue Book. This new 1999 Edition from SEAOC reviews recommended provisions for earthquake-resistant design of structures. Highlights include design requirements, structural tests and inspections, foundations, and recommended modifications to the 1997 Uniform Building Code for reinforced concrete, reinforced masonry, structural steel, and wood. Author: Structural Engineers Association of California Format: Softcover Copyright: 1999 Pages: 440 Code: *************************************** Edit reason: Deleted dead link. (G) RE: blue book - red_pool61 - 12-11-2009 Code: *************************************** Edit reason: Deleted quote of previously deleted request post. (G) |