CSA Z245.17: Cold Bends - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Codes, Manual & Handbook (https://forum.civilea.com/forum-16.html) +---- Forum: CSA (https://forum.civilea.com/forum-187.html) +---- Thread: CSA Z245.17: Cold Bends (/thread-57424.html) |
CSA Z245.17: Cold Bends - poolmand - 02-27-2023 CSA Z245.17:22 - Cold Bends
| Size: 24 MB| Format: PDF| Quality: Scanner| Publisher: CSA Group| Year: 2022
This is the first edition of CSA Z245.17, Cold bends. This Standard covers the requirements for factory-made steel cold bends intended to be used for transporting fluids as specified in CSA Z662. As of this edition, induction bends and cold bends have been removed from CSA Z245.11, Steel fittings, and are now covered in CSA Z245.16 and Z245.17, respectively. CSA Group acknowledges that the development of this Standard was made possible, in part, by the valuable dedication of Maros Tropp and the financial support of ATCO Ltd., Benpro Technologies Corp., British Columbia Oil and Gas Commission, Enbridge Inc., FortisBC Energy Inc., TC Energy Corp., and Tectubi Raccordi S.p.A. (Allied Fitting). This Standard was prepared by the Subcommittee on Materials, under the jurisdiction of the Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials, and the Strategic Steering Committee on Petroleum and Natural Gas Industry Systems, and has been formally approved by the Technical Committee. Code: *************************************** Code: *************************************** Code: *************************************** This post has been made by CivilEA Post-Generator V2.4.1
CSA Z245.17: Cold bends - poolmand - 05-05-2024 CSA Z245.17:22 Cold bends
| Size: 11.62 MB| Format: PDF| Quality: Scanner| Year: 2022
This is the first edition of CSA Z245.17, Cold bends. This Standard covers the requirements for factory-made steel cold bends intended to be used for transporting fluids as specified in CSA Z662. As of this edition, induction bends and cold bends have been removed from CSA Z245.11, Steel fittings, and are now covered in CSA Z245.16 and Z245.17, respectively. CSA Group acknowledges that the development of this Standard was made possible, in part, by the valuable dedication of Maros Tropp and the financial support of ATCO Ltd., Benpro Technologies Corp., British Columbia Oil and Gas Commission, Enbridge Inc., FortisBC Energy Inc., TC Energy Corp., and Tectubi Raccordi S.p.A. (Allied Fitting). This Standard was prepared by the Subcommittee on Materials, under the jurisdiction of the Technical Committee on Petroleum and Natural Gas Industry Pipeline Systems and Materials, and the Strategic Steering Committee on Petroleum and Natural Gas Industry Systems, and has been formally approved by the Technical Committee. Code: *************************************** Code: *************************************** Code: *************************************** This post has been made by CivilEA Post-Generator V2.4.2
|