Plated structural elements - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Structural Books (https://forum.civilea.com/forum-49.html) +---- Forum: Steel (https://forum.civilea.com/forum-56.html) +---- Thread: Plated structural elements (/thread-4890.html) |
Plated structural elements - telefere - 10-18-2009 Plated structural elements
info: Commentary and worked examples to EN 1993-1-5 "Plated structural elements" The objective of this commentary is to present the scientific background to the rules. The mechanical models behind the rules are presented and references to source documents are given. All such models include simplifications, which have to be justified by calibration of the rules against test results. Several models for each failure mode have been checked with calibrations according to Annex D of EN 1990 and the ones included in EN 1993-1-5 are those giving the lowest scatter and the most uniform safety. The procedure for calibration will be summarised in section 1.2. It should be noted that EN 1993-1-5, being a generic code, does not suggest partial factor values. According to the Eurocode system these values depend on the specific application and should be given by application parts e.g. for buildings in EN 1993-1-1 and bridges in EN 1993-2. Worked examples - Launching of a box girder - Orthotropic plate with trapezoid stiffeners - Plate girder Download Links: Code: *************************************** Generate By Civilea PostGen V1.3 RE: Plated structural elements - Bmartin - 04-30-2010 This is an advanced version. Code: *************************************** RE: Plated structural elements - datagap - 12-19-2010 COMMENTARY AND WORKED EXAMPLES TO EN 1993-1-5 “PLATED STRUCTURAL ELEMENTS” Author: B. Johansson, R. Maquoi, G. Sedlacek, C. Müller, D. Beg | Size: 4.28 MB | Format: PDF | Publisher: European Communities | Year: 2007 | pages: 242
The same as above. Code: *************************************** RE: Plated structural elements - gulilero - 02-18-2012 Code: *************************************** Moderator : This thread should be merged with Code: *************************************** |