SIMPLIFIED P-y RELATIONSHIPS FOR MODELING EMBANKMENT- ABUTMENT SYSTEMS OF TYPICAL CAL

SIMPLIFIED P-y RELATIONSHIPS FOR MODELING EMBANKMENT- ABUTMENT SYSTEMS OF TYPICAL CAL - Printable Version

+- Civil Engineering Association (https://forum.civilea.com)
+-- Forum: eBooks (https://forum.civilea.com/forum-63.html)
+--- Forum: Journals, Papers and Presentations (https://forum.civilea.com/forum-74.html)
+--- Thread: SIMPLIFIED P-y RELATIONSHIPS FOR MODELING EMBANKMENT- ABUTMENT SYSTEMS OF TYPICAL CAL (/thread-47814.html)

SIMPLIFIED P-y RELATIONSHIPS FOR MODELING EMBANKMENT- ABUTMENT SYSTEMS OF TYPICAL CAL - TAFATNEB - 06-03-2014

SIMPLIFIED P-y RELATIONSHIPS FOR MODELING EMBANKMENT- ABUTMENT SYSTEMS OF TYPICAL CALIFORNIA BRIDGES

The flexibility οf the embankment-abutment stiffness has been found to drastically effect the seismic response
of the entire bridge, typically depending on the intensity of earthquake ground motion, but also on the
geometrical and mechanical properties of embankment-abutment system. Consequently, significant effort has
been made to incorporate the nonlinear behavior of the lateral support of the deck primarily through inelastic
static (pushover) analysis. However, the difficulties in modeling the nonlinear behavior of soil as well as the
computationally demanding three-dimensional geometry often lead to the disregard of some sources of
nonlinearity such as those associated with the foundation soil and the boundary conditions at bridge abutments.
Along these lines, the scope of this paper is to model and study the nonlinear response of six typical Californian
abutment-embankment systems to derive specific force-deflection (i.e., P-y) relationships as a function of
foundation soil properties, abutment type, and embankment geometry within the framework of an alternative
simplified method proposed by Kappos et al. (2007). Comparative assessment of the current Caltrans guidelines
is also performed and design recommendations are made.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0