ASTM A421 / A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Codes, Manual & Handbook (https://forum.civilea.com/forum-16.html) +---- Forum: ASTM (https://forum.civilea.com/forum-127.html) +---- Thread: ASTM A421 / A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire (/thread-33376.html) |
ASTM A421 / A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire - mybest - 02-04-2012 ASTM A421 / A421M - 10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete Size: 104 KB | Format: PDF | Quality: Original preprint | pages: 4
This specification covers two types of uncoated stress-relieved round high-carbon steel wire commonly used in prestressed linear concrete construction. These two types are the type BA used for applications in which cold-end deformation is used for anchoring purposes and type WA wire which is used for application in which the ends are anchored by wedges, no cold-end deformation of the wire is involved. Required tensile strength, yield strength and elongation shall be evaluated using stress-relaxation test. Heat analysis shall be used to determine the percentage of specified elements especially sulfur and phosphorus to meet the required chemical composition. Code: *************************************** Code: *************************************** |