[REQUEST] SP273 Further Examples for the Design of Structural Concrete with Strut-and-Tie Model - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Books, Codes, Theses, Journals & Papers Request (https://forum.civilea.com/forum-55.html) +---- Forum: Archive (https://forum.civilea.com/forum-176.html) +---- Thread: [REQUEST] SP273 Further Examples for the Design of Structural Concrete with Strut-and-Tie Model (/thread-27264.html) |
SP273 Further Examples for the Design of Structural Concrete with Strut-and-Tie Model - majkyy - 07-10-2011 If anybody has it, pls share this book. Thanx in advance. **************************************** Karl-Heinz Reineck; Lawrence C. Novak SP-273 Further Examples for the Design of Structural Concrete with Strut-and-Tie Model Year of Publication: 2010 Number of Pages: 288 **************************************** Code: *************************************** This Special Publication contains 15 papers that were presented at technical sessions sponsored by Joint ACI-ASCE Committee 445, Shear and Torsion, at the 2010 ACI Spring Convention in Chicago, IL. Topics covered in the papers include an introduction to the method, design examples, common problems experienced in real design applications, additional guidance for use the strut-and-tie model (STM), and an assessment of existing requirements. Contents: SP-273—1 Bridge Pier – Hammerhead Bent Cap by R. Tuchscherer, M. Brown, and O. Bayrak SP-273—2 Four-Column Bent Cap by C. Williams, M. Brown, and O. Bayrak SP-273—3 Strut-and-Tie Design and Detailing of a Foundation Grade Beam by L. de Rooy, T. denHartigh, and R.B. Anderson SP-273—4 Design of Prestressed End Regions by D. Kuchma and T. Nagle SP-273—5 Stepped Beam with Multiple Load Combinations by M.F. Andermatt and A.S. Lubell SP-273—6 Transfer Girder with Asymmetric Loading by A.S. Lubell and K. Habel SP-273—7 Dapped-end Double-Tee Beam with Curved-Bar Nodes by G. Klein SP-273—8 Evaluation of Prestressed Dapped Girder Ends with Cazaly Hangers by K. Habel, M.F. Andermatt, and A.S. Lubell SP-273—9 Design of Two Link Beams of a Medium-Rise Building by H. Bouadi and A. Wahidi SP-273—10 Large Propped Cantilever Beam with Opening by D. Kuchma, S. Yindeesuk, and T. Tjhin SP-273—11 Deep Pile Cap with Tension Piles by Widianto and O. Bayrak SP-273—12 Diaphragm for a Segmental Concrete Bridge by R.J. Beaupre, R.B. Anderson, and V. Bridges SP-273—13 Diaphragm for Extradosed Cable Stayed Bridge by T.J. Kirkpatrick and R.B. Anderson SP-273—14 Importance of Reinforcement Detailing by D. Mitchell, W.D. Cook, and T. Peng SP-273—15 Strut-and-Tie Models Versus Sectional Shear Design: A Discussion Contribution by K.-H. Reineck |