How to design masonry structures using Eurocode 6 - Parts 1/2/3 - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: eBooks (https://forum.civilea.com/forum-63.html) +--- Forum: Structural Books (https://forum.civilea.com/forum-49.html) +---- Forum: Other Materials (Wood, Brick, etc.) (https://forum.civilea.com/forum-64.html) +---- Thread: How to design masonry structures using Eurocode 6 - Parts 1/2/3 (/thread-20733.html) |
How to design masonry structures using Eurocode 6 - Parts 1/2/3 - datagap - 12-30-2010 How to design masonry structures using Eurocode 6 1. Introduction to Eurocode 6 Author: J. J. Roberts, O. Brooker | Size: 0.80 MB | Format: PDF | Publisher: The Concrete Centre | Year: 2007 | pages: 8 | ISBN: 9781904818564
The purpose of this series of guides is to introduce designers to the basic approach adopted in Eurocode 6. This is the first guide in the series of three and provides: - A brief outline of the scope of Eurocode 6. - An introduction to design, including fire resistance and movement. - Assessment of actions and combination of actions using Eurocode. - How to specify mortar and masonry units. - Glossary of Eurocode 6 terms. Code: *************************************** How to design masonry structures using Eurocode 6 2. Vertical resistance Author: J. J. Roberts, O. Brooker | Size: 0.87 MB | Format: PDF | Publisher: The Concrete Centre | Year: 2007 | pages: 8 | ISBN: 9781904818571
This guide is the second in a series of three giving guidance on the design of masonry structures to Eurocode 6. The first guide, Introduction to Eurocode 6 gives an introduction to design and assessment of actions using Eurocode 6 and also covers the specification and execution (workmanship) of masonry. This guide explains how to design for vertical actions and determine vertical resistance. The third guide in the series covers the design of laterally loaded masonry panels. Throughout this guide the Nationally Determined Parameters (NDPs) from the UK National Annexes (NAs) have been used. These enable Eurocode 6 to be applied in the UK. Code: *************************************** How to design masonry structures using Eurocode 6 3. Lateral resistance Author: J. J. Roberts, O. Brooker | Size: 0.53 MB | Format: PDF | Publisher: The Concrete Centre | Year: 2009 | pages: 8 | ISBN: 9781904818588
This guide is the third in a series of three giving guidance on the design of masonry structures to Eurocode 6. The first guide, Introduction to Eurocode 6 gives an introduction to design and assessment of actions using Eurocode 6 and also covers the specification and workmanship of masonry. The second guide in the series covers the design of vertically loaded masonry. This guide explains how to design for horizontal actions. Throughout this guide the Nationally Determined Parameters (NDPs) from the UK National Annexes (NAs) have been used. These enable Eurocode 6 to be applied in the UK. Code: *************************************** RE: How to design masonry structures using Eurocode 6 - Parts 1/2/3 - kvtasp - 12-18-2011 How to design masonry structures using Eurocode 6 1. Introduction to Eurocode 6 Code: *************************************** How to design masonry structures using Eurocode 6 2. Vertical resistance Code: *************************************** How to design masonry structures using Eurocode 6 3. Lateral resistance Code: *************************************** |