Civil Engineering Association
Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under - Printable Version

+- Civil Engineering Association (https://forum.civilea.com)
+-- Forum: eBooks (https://forum.civilea.com/forum-63.html)
+--- Forum: Journals, Papers and Presentations (https://forum.civilea.com/forum-74.html)
+--- Thread: Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under (/thread-16488.html)

Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under - yanburak - 09-15-2010

Punching Shear Retrofit Method Using Shear Bolts for Reinforced Concrete Slabs under Seismic Loading

[Image: 25073506045482972651.jpg]

[Image: info.png]
The shear bolts are a new type of transverse reinforcement developed for retrofit of existing structures
against punching. This research focuses on how the shear bolts can improve the punching-shear
capacity and ductility of the existing slab-column connections under vertical service and lateral
seismic loads.
A set of nine full-scale reinforced concrete slab-column connection specimens were tested under
vertical service and cyclic loads. The vertical (gravity) load for each specimen was kept at a constant
value throughout the testing. The cyclic lateral drift with increasing intensity was applied to the
columns. The specimens were different in number of bolts, concrete strength, number of openings,
and level of gravity punching load. Strains in flexural rebars in the slabs, crack widths, lateral loads,
and displacements were obtained.
The peak lateral load (moment) and its corresponding drift ratio, connection stiffness, crack width,
and ductility were compared among different specimens. The testing results show that shear bolts can
increase lateral peak load resisting capacity, lateral drift capacity at peak load, and ductility of the
slab-column connections. Shear bolts also change the failure mode of the slab-column connections
and increase the energy dissipation capacity.
The thesis includes also research on the development of guidelines for shear bolt design for concrete
slab retrofitting, including the punching shear design method of concrete slab (with shear bolts),
dimensions of bolts, spacing, and influence of bolt layout patterns. Suggestions are given for
construction



[Image: Download.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Image: password.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************