Civil Engineering Association

Full Version: Seismic capacity evaluation of post-tensioned concrete
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Seismic capacity evaluation of post-tensioned concrete

[Image: 23168359320449339529.jpg]

[Image: info.png]
Seismic capacity evaluation of post-tensioned concrete slab-column frame buildings designed only
for gravity loads and wind load is presented. The series of nonlinear pushover analyses are carried out
by using the computer program SAP2000. An equivalent frame model with explicit transverse torsional
members is introduced for modeling slab-column connections. The analyses are carried out by following
guidelines in ATC-40 and FEMA-273/274, where several important factors such as P-Delta effects, strength
and stiffness contributions from masonry infill walls, and foundation flexibility are well taken into account.
The pushover analysis results, presented in the form of capacity curves, are compared with the seismic
demand from the expected earthquake ground motion for Bangkok and then the seismic performance can
be evaluated. Numerical examples are performed on the 9- and 30-storey post-tension flat-plate buildings
in Bangkok. The results show that in general post-tensioned concrete slab-column frame buildings without
shear wall possess relatively low lateral stiffness, low lateral strength capacity, and poor inelastic response
characteristics. The evaluation also shows that the slab-column frame combined with the shear wall system
and drop panel can increase the strength and stiffness significantly.


[Image: screen.png]
[Image: 79412473308485775869.jpg]

[Image: Download.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[Image: password.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

Admin, I hope it is in the right section. Regards.
Please upload to any other place.
Let's try this link:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************