12-17-2009, 06:03 PM
Finite Element Modeling of Partially Restrained Beam-to-Girder Connections
In recent years the design of steel framed composite floor systems has been controlled more often by serviceability criteria than by strength. It has been suggested that a partially continuous composite floor system would improve serviceability limit states; and that, partially restrained beam-to-girder connections are the key to such a floor system (Rex and Easterling 1994). A research project aimed at developing design methods and criteria for partially restrained beam-to-girder connections and partially continuous floor systems is currently in progress at Virginia Polytechnic Institute and State University (VPI). This paper focuses on a finite element modeling technique that is being used to predict the moment-rotation behavior of various beam-to-girder connections. This method relies heavily on the behavior models of various connection sub-elements (bolts, welds, etc...). These connection sub-element models are also discussed.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Edit reason: Dead link removed. Title of thread adjusted to fit the title of article (G)