08-28-2009, 04:02 PM
BLUE BOOK of UBC 1997
Short description:
The first edition of this Design Guide was published in 1985; it was revised in 1987 (2nd Edition), in 1992 (3rd Edition), in 1996 (4th Edition), in 1997 (5th edition) and in 2001 (6th edition). It is a basic working tool for users of BS 5950-1 Structural use of steelwork in building – Code of practice for design – Rolled and welded sections, which was first published in 1985, revised in 1990 and in 2000.
This edition is a reprint of the 6th edition, in which the section range has been updated. The tables are dual titled with the BS designation as well as the Advance (open sections), Celsius® (hot finished hollow sections) or Hybox® (cold formed hollow sections) branding.
The following structural sections are covered in this publication:
• Universal beams, Universal columns, joists, bearing piles, parallel flange channels, and
structural tees cut from Universal beams and Universal columns to BS 4-1
• ASB (asymmetric beams) Slimdek® beam produced by Corus (see Corus brochure, Advance™ sections, 09/2006))
• Equal and Unequal angles to BS EN 10056-1
• Hot-finished structural hollow sections to BS EN 10210-2
• Cold-formed structural hollow sections to BS EN 10219-2
Section ranges listed are intended to be in line with sections that are readily available at the time of printing. Some sections, which are readily available but not listed in the above standards, are also included; these sections are designated by “+” in the tables.
The editorial work for the 7th Edition was carried out by Miss E Nunez Moreno, based on the 6th edition produced by Mr A Way and Mr A S Malik, with technical assistance from Mr C M King of the SCI and Mr J C Taylor, formerly of the SCI. The 6th edition was coordinated by Mr D G Brown, of the SCI, and Mr P J Williams, formerly of the BCSA.
This publication has been jointly funded by SCI and BCSA. Acknowledgement is also given to
Corus for its support for the work leading to the preparation of the initial formulae on which the capacity tables are based.
Screenshot:
Download Link:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Moderator note:
Thread moved from request section. (G)