Civil Engineering Association

This code contains the requirements for fabricating and erecting welded steel structures. When this code is stipulated in contract documents, conformance with all provisions of the code shall be required, except for those provisions that the Engineer (see 1.4.1) or contract documents specifically modifies or exempts.

The code was specifically developed for welded steel structures that utilize carbon or low alloy steels that are 1/8 in [3 mm] or thicker with a minimum specified yield strength of 100 ksi [690 MPa] or less. The code may be suitable to govern structural fabrications outside the scope of the intended purpose. However, the Engineer should evaluate such suitability, and based upon such evaluations, incorporate into contract documents any necessary changes to code requirements to address the specific requirements of the application that is outside the scope of the code. The Structural Welding Committee encourages the Engineer to consider the applicability of other AWS D1 codes for applications involving aluminum (AWS D1.2), sheet steel equal to or less than 3/16 in [5 mm] thick (AWS D1.3), reinforcing steel (AWS D1.4), and stainless steel (AWS D1.6), strengthening and repair of existing structures (AWS D1.7), seismic supplement (AWS D1.8), and titanium (AWS D1.9). The AASHTO/AWS D1.5 Bridge Welding Code was specifically developed for welding highway bridge components and is recommended for those applications.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1

AWS D1.1/D1.1M: 2015 Structural Welding Code - Steel

Size: 6.9 MB
Quality: Original preprint

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1[/align]

AWS D1.1/D1.1M: 2015 Structural Welding Code - Steel

Size: 6.89 MB | Format: PDF | Quality: Original preprint

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1

This code covers the welding requirements for any type of welded structure made from the commonly used carbon andlow-alloy constructional steels. Clauses 1 through 1 1 constitute a body of rules for the regulation of elding in steel construction. There are eight normative and eleven informative annexes in this code. A Commentary of the code is included with the document.

The first edition of the Code for Fusion Welding and Gas Cutting in Building Construction was published by the American Welding Society in 1 928 and called Code 1 Part A. It was revised in 1 930 and 1 937 under the same title. It was revised again in 1 94 1 and given the designation D l .O. D l .O was revised again in 1 946, 1 963, 1 966, and 1 969. The 1 963 edition published an amended version in 1 965, and the 1 966 edition published an amended version in 1 967. The code was combined with D2.0, Specifications for Welding Highway and Railway Bridges, in 1 972, given the designation D l . 1 , and retitled AWS Structural Welding Code. D l . l was revised again in 1 975, 1 979, 1 980, 198 1 , 1 982, 1 983, 1 984, 1 985, 1 986, 1 988, 1 990, 1 992, 1 994, 1 996, 1 998, 2000, 2002, 2004, 2006, 2008 and 20 1 0. A second printing of D l . 1 :20 1 0 was published
in 201 1 . From 1 972 to 1 988, the D l.1 code covered the welding of both buildings and bridges.
Supersedes AWS Dl.1/Dl.1M:2015

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1

AWS D1.1/D1.1M: 2020 Structural Welding Code - Steel

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.3.1

AWS D1.1/D1.1M: 2020 Structural Welding Code - Steel

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

AWS D1.1/D1.1M-2020+Errata: Structural Welding Code—Steel
Includes all amendments and changes through Errata , March 2022

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator V2.4.2

anfaga

rami1976

malc

malc

Veggeta

JUANCM

poolmand