Civil Engineering Association

Brief note on the influence of shape and percentage of gravel on the shear strength of sand and gravel mixtures

The paper records the influence of the shape and the percentage of gravel on the shear strength/frictional angle of sand and gravel mixtures using direct shear tests. The shear strength is mainly derived from the frictional forces developed due to sliding and interlock; they depend on the maximum particle size and shape, the uniformity coefficient, density and the effective normal stress. As the size of material in a mixture is variable, the shear strength also depends upon the ratio of the specimen diameter to the maximum particle size. In this study, two different shapes of limestone were used, angular and rounded, and the maximum gravel size was 6.3 mm in diameter. Air-dried samples were used in the tests. It is concluded that the shape and percentage of gravel have an important influence on the shear strength properties.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0

lisine