Civil Engineering Association

ATV-DVWK-A 127E Static Calculation of Drains and Sewers

This standard applies for the static calculation of underground drains and sewers. It can be used analogously for other pipes laid in the ground. With extreme conditions - for example, very large or very small amounts of cover, very large cross-sections, slopes - special consideration is necessary, which can be the basis for deviations from this standard. This also applies for special designs, for example for driven pipes1), unstable subsoil and elevated pipelines.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

ir_71