Civil Engineering Association

ELSEVIER Referex Engineering Complete Handbook Collection

Chemical/Petrochemical and Process Collection

Volume 1/7: ChemE1

AHMED, T. H. (2000). Reservoir Engineering Handbook (2nd ed.)
AHMED, T. H. (2005). Advanced Reservoir Engineering
ARMAREGO, W. L. F. (2003). Purification of Laboratory Chemicals (5th ed.)
ARNOLD, K. (1998). Design of Oil-Handling Systems and Facilities (2nd ed.)
ARNOLD, K. (1999). Design of Gas-Handling Systems and Facilities (2nd ed.)
BAI, Y. (2001). Pipelines and Risers
BERTY, J. M. (1999). Experiments in Catalytic Reaction Engineering
BLOCH, H. P. (1996). Reciprocating Compressors – Operation and Maintenance
BLOCH, H. P. (2001). Turboexpanders and Process Applications
BOUBEL, R. W. (1994). Fundamentals of Air Pollution (3rd ed.)
BOYES, W. (2002). Instrumentation Reference Book (3rd ed.)
BRANAN, C. R. (2002). Rules of Thumb for Chemical Engineers (3rd ed.)
BROWN, R. N. (1997). Compressors – Selection and Sizing (2nd ed.)
BURNS, R. S. (2001). Advanced Control Engineering
BURNS, T. E. (2002). Serious Incident Prevention (2nd ed.)
BURYAKOVSKY, L. A. (2001). Petroleum Geology of the South Caspian Basin
CHEREMISINOFF, N. P. (2000). Handbook of Chemical Processing Equipment
CHEREMISINOFF, N. P. (2000). Handbook of Hazardous Chemical Properties
CHEREMISINOFF, N. P. (2002). Handbook of Air Pollution Prevention and Control
CHEREMISINOFF, N. P. (2002). Handbook of Water and Wastewater Treatment Technologies
CHHABRA, R. P. (1999). Non-Newtonian Flow in the Process Industries
CHIN, W. C. (2000). Computational Rheology for Pipeline and Annular Flow
CHIN, W. C. (2002). Quantitative Methods in Reservoir Engineering
CIVAN, F. (2000). Reservoir Formation Damage – Fundamentals, Modeling, Assessment, and Mitigation
COKER, A. K. (2001). Modeling of Chemical Kinetics and Reactor Design
DARLEY, H. C. H. (1988). Composition and Properties of Drilling and Completion Fluids (5th ed.)
DAVENPORT, W. G. (2002). Extractive Metallurgy of Copper (4th ed.)
ECKHOFF, R. K. (2003). Dust Explosions in the Process Industries (3rd ed.)
EL-HALWAGI, M. M. (1997). Pollution Prevention through Process Integration – Systematic Design Tools
EL-MAHALLAWY, F. (2002). Fundamentals and Technology of Combustion
FANCHI, J. R. (2000). Principles of Applied Reservoir Simulation (2nd ed.)
FLORCZAK, C. M. (2001). Hazardous Waste Compliance
FOLEY, H. C. (2002). An Introduction to Chemical Engineering Analysis Using MATHEMATICA
FULLWOOD, R. R. (1999). Probabilistic Safety Assessment in the Chemical and Nuclear Industries
GIBILARO, L. G. (2001). Fluidization Dynamics – A Predictive Theory
GOODFELLOW, H. (2001). Industrial Ventilation Design Guidebook
GRACE, R. D. (1994). Advanced Blowout and Well Control
JONES, A. G. (2002). Crystallization Process Systems
KLETZ, T. A. (1998). What Went Wrong – Case Histories of Process Plant Disasters (4th ed.)
KLETZ, T. A. (2001). Learning from Accidents (3rd ed.)

Volume 2/7: ChemE2

KLENIN, V. J. (1999). Thermodynamics of Systems Containing Flexible-Chain Polymers
KOHL, A. L. (1997). Gas Purification (5th ed.)
LAPEYROUSE, N. J. (2002). Formulas and Calculations for Drilling, Production, and Workover (2nd ed.)
LEES, F. P. (1995). Loss Prevention in the Process Industries (2nd ed.) (3 vols.)
LOBANOFF, V. S. (1992). Centrifugal Pumps – Design and Application (2nd ed.)
LUDWIG, E. E. (2001). Applied Process Design for Chemical and Petrochemical Plants (3rd ed.) (3 vols.)
LUETTGENS, G. (1997). Electrostatic Hazards
LYONS, W. C. (1996). Standard Handbook of Petroleum and Natural Gas Engineering (2 vols.)
MARTIN, W. F. (2000). Hazardous Waste Handbook for Health and Safety (3rd ed.)
MATAR, S. (2000). Chemistry of Petrochemical Processes (2nd ed.)
MCALLISTER, E. W. (2001). Pipeline Rules of Thumb Handbook (5th ed.)
MOSS, D. R. (2003). Pressure Vessel Design Manual (3rd ed.)
MUHLBAUER, W. K. (2004). Pipeline Risk Management Manual – Ideas, Techniques, and Resources (3rd ed.)
MULLIN, J. W. (2001). Crystallization (4th ed.)
MURRAY, R. L. (2000). Nuclear Energy – An Introduction to the Concepts, Systems, etc. (5th ed.)
NELSON, R. A. (2001). Geologic Analysis of Naturally Fractured Reservoirs (2nd ed.)
PAGE, J. S. (1999). Estimator’s Piping Man-Hour Manual (5th ed.)
PARISHER, R. A. (2001). Pipe Drafting and Design (2nd ed.)
PARKER, M. E. (1984). Pipe Line Corrosion and Cathodic Protection (3rd ed.)
POCIUS, A. V. (2002). Adhesion Science and Engineering (2 vols.)
RANADE, V. V. (2001). Computational Flow Modeling for Chemical Reactor Engineering
RATNER, B. D. (1996). Biomaterials Science – An Introduction to Materials in Medicine
REIS, J. C. (1996). Environmental Control in Petroleum Engineering
RICHARDSON, J. F. (2001). Coulson & Richardson’s Chemical Engineering Volume 4
RICHARDSON, J. F. (2002). Coulson & Richardson’s Chemical Engineering Volume 2 (5th ed.)
ROBINSON, L. (1999). Shale Shakers and Drilling Fluid Systems
SADEGHBEIGI, R. (2000). Fluid Catalytic Cracking Handbook (2nd ed.)
SANDERS, R. E. (1999). Chemical Process Safety – Learning from Case Histories
SANKS, R. L. (1998). Pumping Station Design (2nd ed.)
SHAW, D. J. (1992). Introduction to Colloid and Surface Chemistry (4th ed.)

Volume 3/7: ChemE3

ABELL, M. L. (1993). MATHEMATICA By Example (rev. ed.)
BEJAN, A. (2003). Heat Transfer Handbook
BIRD, R. B. (2001). Transport Phenomena (2nd ed.)
CLAYDEN, J. (2001). Organic Chemistry
DARBY, R. (2001). Chemical Engineering Fluid Mechanics (2nd ed.)
GRAY, J. W. (1994). Mastering MATHEMATICA – Programming methods and applications
KARRIS, S. T. (2004). Numerical Analysis Using MATLAB and Spreadsheets (2nd ed.)
KREITH, F. (1999). The CRC Handbook of Thermal Engineering
MAEDER, R. E. (1999). Computer Science with MATHEMATICA
RICE, R. G. (1994). Applied Mathematics and Modeling for Chemical Engineers
ROBBINS, A. H. (2003). Circuit Analysis – Theory and Practice (3rd ed.)
SHREIR, L. L. (1993). Corrosion (3rd ed.) (2 vols.)
SMITH, R. (2005). Chemical Process Design and Integration
SORENSEN, B. (2003). Renewable Energy (3rd ed.)
STOLEN, S. (2003). Chemical Thermodynamics of Materials – Macroscopic and Microscopic Aspects
SVAROVSKY, L. (2000). Solid-Liquid Separation (4th ed.)
TIAB, D. (2004). Petrophysics – Theory and Practice of Measuring Reservoir Rock Properties etc. (2nd ed.)
TIRATSOO, J. N. H. (1991). Pipeline Pigging Technology (2nd ed.)
TOSUN, I. (2002). Modelling in Transport Phenomena – A Conceptual Approach
UPP, E. L. (2001). Fluid Flow Measurement – A Practical Guide to Accurate Flow Measurement (2nd ed.)
URBEN, P. G. (1999). Bretherick’s Handbook of Reactive Chemical Hazards (6th ed.) (2 vols.)
VANDOREN, V. J. (2002). Techniques for Adaptive Control
VON BAECKMANN, W. (1997). Handbook of Cathodic Corrosion Protection (3rd ed.)
WALAS, S. M. (1988). Chemical Process Equipment – Selection and Design
WEINER, R. F. (2003). Environmental Engineering (4th ed.)
WOLFRAM, Stephen (2003). The MATHEMATICA Book (5th ed.)
WOODARD, F. (2000). Industrial Waste Treatment Handbook
YAWS, C. L. (1996). Handbook of Thermodynamic Diagrams (4 vols.)
ZAPPE, R. W. (1998). Valve Selection Handbook (4th ed.)

Mechanical and Materials Collection

Volume 4/7: MechE1

ALCOCK, C. B. (2000). Thermochemical Processes – Principles and Models
ASHBY, M. F. (1998). Engineering Materials (2nd ed.) (2 vols.)
ASHBY, M. F. (2000). Metal Foams – A Design Guide
BACHUS, L. (2003). Know and Understand Centrifugal Pumps
BAI, Y. (2003). Marine Structural Design
BAKER, A. A. (2002). Advances in the Bonded Composite Repair of Metallic Aircraft Structure (2 vols.)
BERTRAM, V. (2000). Practical Ship Hydrodynamics
BIRD, J. (2003). Engineering Mathematics (4th ed.)
BLAZEK, J. (2001). Computational Fluid Dynamics – Principles and Applications
BLOCH, H. P. (1990). Machinery Component Maintenance and Repair (2nd ed.)
BLOCH, H. P. (1996). Major Process Equipment Maintenance and Repair (2nd ed.)
BLOCH, H. P. (1998). Improving Machinery Reliability (3rd ed.)
BONNICK, A. W. M. (2001). Automotive Computer Controlled Systems – Diagnostic Tools and Techniques
BOOKER, J. D. (2001). Designing Capable and Reliable Products
BOYCE, M. P. (2001). Gas Turbine Engineering Handbook (2nd ed.)
BRAMWELL, A. R. S. (2001). Bramwell’s Helicopter Dynamics (2nd ed.)
BRANDES, E. A. (1992). Smithells Metals Reference Book (7th ed.)
BRANDES, E. A. (1998). Smithells Light Metals Handbook
BROWN, J. R. (1999). Foseco Non-Ferrous Foundryman’s Handbook (11th ed.)
BROWN, J. R. (2000). Foseco Ferrous Foundryman’s Handbook
BRUNDLE, C. R. (1992). Encyclopedia of Materials Characterization – Surfaces, Interfaces, Thin Films
BRYDSON, J. A. (1999). Plastics Materials (7th ed.)
BURCHELL, T. D. (1999). Carbon Materials for Advanced Technologies
BUTLER, D. (2000). Guide to Ship Repair Estimates – In Man-Hours
CAHN, R. W. (1996). Physical Metallurgy (4th ed.) (3 vols.)
CAHN, R. W. (2001). The Coming of Materials Science
CAMPBELL, B. A. (1996). Introduction to Space Sciences and Spacecraft Applications
CAMPBELL, J. (2003). Castings – The New Metallurgy of Cast Metals (2nd ed.)
CARPINTERI, A. (2003). Biaxial-Multiaxial Fatigue and Fracture
CARSON, P. (2002). Hazardous Chemicals Handbook (2nd ed.)
CARVILL, J. (1993). Mechanical Engineer’s Data Handbook
CHILDS, T. (2000). Metal Machining – Theory and Applications
COCKCROFT, A. N. (2004). A Guide to the Collision Avoidance Rules (6th ed.)
CRAWFORD, R. J. (1998). Plastics Engineering (3rd ed.)
DERRETT, D. R. (1999). Ship Stability for Masters and Mates (5th ed.)
DIXON, S. L. (1998). Fluid Mechanics, Thermodynamics of Turbomachinery (4th ed.)
ELICES M. (2002). Fiber Fracture
ENDO, M. (1996). Carbon Nanotubes
EYRES, D. J. (2001). Ship Construction (5th ed.)
GARRETT, T. K. (2001). The Motor Vehicle (13th ed.)
HALEVI, G. (2001). Handbook of Production Management Methods
HEISLER, H. (2002). Advanced Vehicle Technology (2nd ed.)
HODKINSON, R. (2001). Lightweight Electric Hybrid Vehicle Design
HORLOCK, J. H. (2003). Advanced Gas Turbine Cycles
HOUGHTON, E. L. (2002). Aerodynamics for Engineering Students (5th ed.)
HOUSE, D. J. (2001). Seamanship Techniques (2nd ed.)
HOYLE, D. (2000). Automotive Quality Systems Handbook
HOYLE, D. (2001). ISO 9000 Quality Systems Handbook (4th ed.)
HOYLE, D. (2003). ISO 9000_ 2000 – An A-Z Guide
HUDSON, J. A. (2000). Engineering Rock Mechanics (2 vols.)
JENKINSON, L. R. (2003). Aircraft Design Projects for Engineering Students
JONES, D. R. H. (2001). Failure Analysis Case Studies II
JUDD, S. (2003). Membranes for Industrial Wastewater Recovery and Re-Use
KIM, J.-K. (1998). Engineered Interfaces in Fiber Reinforced Composites
KING, R. P. (2002). Introduction to Practical Fluid Flow
KUNDU, P. K. (2001). Fluid Mechanics (2nd ed.)

Mechanical and Materials Collection

Volume 5/7: MechE2

LAI, W. M. (1993). Introduction to Continuum Mechanics (3rd ed.)
LESTER, A. (2003). Project Planning and Control (4th ed.)
LIENGME, B. V. (2002). A Guide to Microsoft Excel 2002 for Scientists and Engineers (3rd ed.)
MARCINIAK, Z. (2002). Mechanics of Sheet Metal Forming (2nd ed.)
MARGHITU, D. B. (2001). Mechanical Engineer’s Handbook
MATTHEWS, C. (2001). Aeronautical Engineer’s Data Book
MCFARLANE, B. (2002). Beginning AutoCAD 2002
MCFARLANE, B. (2002). Modelling with AutoCAD 2002
MCGEORGE, H. D. (1995). Marine Auxiliary Machinery (7th ed.)
MEGSON, T. H. G. (1999). Aircraft Structures for Engineering Students (3rd ed.)
MERCER, R. B. (2001). Industrial Control Wiring Guide (2nd ed.)
MOBLEY, R. K. (1999). Root Cause Failure Analysis
MOBLEY, R. K. (1999). Vibration Fundamentals
MOBLEY, R. K. (2002). An Introduction to Predictive Maintenance (2nd ed.)
MOBLEY, R. K. (2003). Plant Engineering Handbook
MOMBER, A. W. (2002). Hydroblasting and Coating of Steel Structures
MURAKAMI, Y. (2002). Metal Fatigue – Effects of Small Defects and Nonmetallic Inclusions
NEALE, M. J. (1995). The Tribology Handbook (2nd ed.)
OAKLAND, J. S. (2003). Statistical Process Control (5th ed.)
OHRING, M. (1991). The Materials Science of Thin Films
PACEJKA, H. B. (2002). Tyre Mechanics and Vehicle Dynamics
PAIDOUSSIS, M. P. (1998). Fluid-Structure Interactions – Slender Structures and Axial Flow (vol. 1)
POPE, J. E. (1996). Rules of Thumb for Mechanical Engineers
RAWSON, K. J. (2001). Basic Ship Theory (5th ed.) (2 vols.)
REIMPELL, J. (2001). The Automotive Chassis – Engineering Principles (2nd ed.)
RIBBENS, W. B. (1997). Understanding Automotive Electronics (5th ed.)
RIDLEY, J. (2002). Safety at Work (6th ed.)
ROSATO, D. V. (2003). Plastics Engineered Product Design
SANDLER, B.-Z. (1999). Robotics – Designing the Mechanisms for Automated Machinery (2nd ed.)
SCHNEEKLUTH, H. (1998). Ship Design for Efficiency and Economy (2nd ed.)
SIDERIS, M. (1998). Methods for Monitoring and Diagnosing the Efficiency of Catalytic Converters
SMALLMAN, R. E. (1999). Modern Physical Metallurgy and Materials Engineering – Science, Process, Application
SMITH, D. J. (2001). Reliability, Maintainability and Risk – Practical Methods for Engineers (6th ed.)
SMITH, E. H. (1994). Mechanical Engineer’s Reference Book (12th ed.)
STACHOWIAK, G. W. (2000). Engineering Tribology (2nd ed.)
STOLARSKI, T. A. (1990). Tribology in Machine Design
TANAKA, K. (1999). The Science and Technology of Carbon Nanotubes
TAYLOR, D. A. (1996). Introduction to Marine Engineering (2nd ed.)
TETLEY, L. (2001). Electronic Navigation Systems (3rd ed.)
TONG, L. (2002). 3D Fibre Reinforced Polymer Composites
TROTT, A. R. (2000). Refrigeration and Air-Conditioning (3rd ed.)
TUPPER, E. C. (1996). Introduction to Naval Architecture (3rd ed.)
VASILIEV, V. V. (2001). Mechanics and Analysis of Composite Materials
WATSON, D. G. M. (1998). Practical Ship Design
WILLMOTT, P. (2001). TPM – A Route to World-Class Performance
WOODYARD, D. F. (2004). Pounder’s Marine Diesel Engines and Gas Turbines (8th ed.)
WU, Y.-S. (2001). Practical Design of Ships and Other Floating Structures (vol. 1)
YASUDA, E. (2003). Carbon Alloys – Novel Concepts to Develop Carbon Science and Technology
YUN, L. (2000). Theory and Design of Air Cushion Craft
ZIENKIEWICZ, O. C. (2000). The Finite Element Method (5th ed.) (3 vols.)

Electronics and Electrical Collection

Volume 6/7: ElecE1

ABBOTT, D. (2003). Linux for Embedded and Real-Time Applications
ACHA, E. (2002). Power Electronic Control in Electrical Systems
AGRAWAL, G. P. (2001). Applications of Nonlinear Fiber Optics
AGRAWAL, G. P. (2001). Nonlinear Fiber Optics (3rd ed.)
AGRAWAL, K. C. (2001). Industrial Power Engineering and Applications Handbook
AKANSU, A. N. (2001). Multiresolution Signal Decomposition – Transforms, Subbands, and Wavelets (2nd ed.)
AL-MUALLA, M. E. (2001). Video Coding for Mobile Communications – Efficiency, Complexity, and Resilience
ANDERSON, H. (2003). Newnes PC Troubleshooting Pocket Book (2nd ed.)
ARNOLD, K. (2001). Embedded Controller Hardware Design
BALL, S. R. (2001). Analog Interfacing to Embedded Microprocessors – Real World Design
BALL, S. R. (2002). Embedded Microprocessor Systems – Real World Design (3rd ed.)
BANKMAN, I. N. (2000). Handbook of Medical Imaging Processing and Analysis
BECKER, P. C. (1997). Erbium-Dope Fiber Amplifiers – Fundamentals and Technology
BIGELOW, S. J. (2001). Understanding Telephone Electronics (4th ed.)
BIRD, J. (2001). Electrical Circuit Theory and Technology (2nd ed.)
BOVIK, A. (2000). Handbook of Image and Video Processing
BOWICK, C. (1997). RF Circuit Design
BRICE, R. (2003). Newnes Guide to Digital TV (2nd ed.)
BROWN, G. (2001). Radio and Electronics Cookbook
BROWN, M. (1990). Practical Switching Power Supply Design
BROWN, M. (2001). Power Supply Cookbook (2nd ed.)
BUCHANAN, W. (2000). Computer Busses – Design and Application
CARR, J. J. (2001). Antenna Toolkit (2nd ed.)
CARR, J. J. (2002). RF Components and Circuits
CEVOLI, P. (2002). Embedded FreeBSD Cookbook
CIRSTEA, M. N. (2002). Neural and Fuzzy Logic Control of Drives and Power Systems
CLEIN, D. (1999). CMOS IC Layout – Concepts, Methodologies, and Tools
CRISP, J. (2001). Introduction to Fiber Optics (2nd ed.)
CROMPTON, T. R. (2000). Battery Reference Book (3rd ed.)
DA SILVA, E. (2001). High Frequency and Microwave Engineering
DECOURSEY, W. J. (2003). Statistics and Probability for Engineering Applications – With Microsoft Excel
DECUSATIS, C. (2001). Fiber Optic Data Communication – Technological Trends and Advances
DECUSATIS, C. (2002). Handbook of Fiber Optic Data Communication (2nd ed.)
DHAMEJA, S. (2001). Electric Vehicle Battery Systems
DHIR, A. (2004). The Digital Consumer Technology Handbook
DUARTE, F. J. (1995). Tunable Lasers Handbook
DUNCAN, B. (1996). High Performance Audio Power Amplifiers for Music Performance and Reproduction
DUTTA, A. K. (2002). WDM Technologies – Active Optical Components
DYE, N. (2000). Radio Frequency Transistors – Principles and Practical Applications (2nd ed.)
EISENREICH, D. (2003). Designing Embedded Internet Devices
ELLIOT, B. (2002). Fiber Optic Cabling (2nd ed.)
ELLIOTT, D. F. (1987). Handbook of Digital Signal Processing – Engineering Applications
ELLIS, G. (2002). Observers in Control Systems – A Practical Guide
FENG, G. (1999). Adaptive Control Systems
FISCHER-CRIPPS, A. C. (2002). Newnes Interfacing Companion
FUKUNAGA, K. (1990). Introduction to Statistical Pattern Recognition (2nd ed.)
GANSSLE, J. G. (1999). The Art of Designing Embedded Systems
GIBSON, J. D. (2001). Multimedia Communications – Directions and Innovations
GRAF, R. F. (1999). Modern Dictionary of Electronics (7th ed.)
HAHN, B. D. (2002). Essential Java for Scientists and Engineers
HEATHCOTE, M. J. (1998). The J & P Transformer Book (12th ed.)
HICKMAN, I. (1999). Analog Circuits Cookbook (2nd ed.)
HICKMAN, I. (2002). Practical Radio-Frequency Handbook (3rd ed.)
JACK, K. (2001). Video Demystified – A Handbook for the Digital Engineer (3rd ed.)
JACK, K. (2002). Dictionary of Video and Television Technology
JENNINGS, D. (1995). Introduction to Medical Electronics Applications
KAMINOW, I. P. (1997). Optical Fiber Telecommunications III (2 vols.)
KAMINOW, I. P. (2001). Optical Fiber Telecommunications IV (2 vols.)
KASHYAP, R. (1999). Fiber Bragg Gratings
KESTER, W. (2003). Mixed-Signal and DSP Design Techniques
KITCHEN, R. (2001). RF and Microwave Radiation Safety Handbook (2nd ed.)
KOLAWOLE, M. O. (2002). Radar Systems, Peak Detection and Tracking
KUFFEL, E. (2000). High Voltage Engineering – Fundamentals (2nd ed.)
LEE, N.-C. (2001). Reflow Soldering Processes and Troubleshooting – SMT, BGA, CSP and Flip Chip Technologies

Electronics and Electrical Collection

Volume 7/7: ElecE2

LAUGHTON, M. A. (2002). Electrical Engineer’s Reference Book (16th ed.)
LEVEN, A. (2000). Telecommunications Circuits and Technology
LIPOVSKI, G. J. (1999). Introduction to Microcontrollers – Architecture, etc. for the Motorola 68HC12
LIPOVSKI, G. J. (1999). Single- and Multi-Chip Microcontroller Interfacing for the Motorola 68HC12
MALLAT, S. (1999). A Wavelet Tour of Signal Processing (2nd ed.)
MANCINI, R. (2002). Op Amps for Everyone
MANDYAM, G. (2002). Third-Generation CDMA Systems for Enhanced Data Services
MARKVART, T. (2003). Practical Handbook of Photovoltaics – Fundamentals and Applications
MAXFIELD, C. (2002). Bebop to the Boolean Boogie (2nd ed.)
MAZDA, F. (1997). Power Electronics Handbook (3rd ed.)
MCMILLAN, A. (1998). Electrical Installations in Hazardous Areas
MIDDLETON, W. M. (2001). Reference Data for Engineers – Radio, Electronics, Computer, etc. (9th ed.)
NASSAR, C. (2000). Telecommunications Demystified
NIXON, M. S. (2002). Feature Extraction and Image Processing
PARR, E. A. (2003). Programmable Controllers – An Engineer’s Guide (3rd ed.)
PEASE, R. A. (1991). Troubleshooting Analog Circuits – With Electronics Workbench Circuits
RASHID, M. H. (2001). Power Electronics Handbook
REZNIK, L. (1997). Fuzzy Controllers
SCHEIBER, S. F. (2001). Building a Successful Board-Test Strategy (2nd ed.)
SCHMITT, R. (2002). Electromagnetics Explained – A Handbook for Wireless-RF, EMC, and High-Speed Electronics
SEKKAT, Z. (2002). Photoreactive Organic Thin Films
SELF, D. (2002). Audio Power Amplifier Design Handbook (3rd ed.)
SINCLAIR, I. R. (1998). Audio and Hi-Fi Handbook (3rd ed.)
SINCLAIR, I. R. (2001). Sensors and Transducers (3rd ed.)
SINGHAL, S. C. (2002). High Temperature Solid Oxide Fuel Cells – Fundamentals, Design and Applications
SMITH, S. W. (2003). Digital Signal Processing – A Practical Guide for Engineers and Scientists
STRAUSS, R. (1998). SMT Soldering Handbook – Surface Mount Technology (2nd ed.)
TERASHIMA, N. (2001). Intelligent Communication Systems
TERRELL, D. L. (1996). Op Amps – Design, Application, and Troubleshooting (2nd ed.)
THEODORIDIS, S. (2002). Pattern Recognition (2nd ed.)
TINDER, R. F. (2000). Engineering Digital Design (2nd ed.)
TOOLEY, M. (2002). Newnes Data Communications Pocket Book (4th ed.)
TRICKER, R. (2000). CE Conformity Marking and New Approach Directives
TRUNDLE, E. (2001). Newnes Guide to Television and Video Technology (3rd ed.)
VAN SICKLE, T. (2001). Programming Microcontrollers in C (2nd ed.)
VARTERESIAN, J. (2002). Fabricating Printed Circuit Boards
WANHAMMER, L. (1999). DSP Integrated Circuits
WARNE, D. F. (2000). Newnes Electrical Engineer’s Handbook
WILLIAMS, J. (1991). Analog Circuit Design – Art, Science, and Personalities
WILLIAMS, J. (1998). The Art and Science of Analog Circuit Design
WILLIAMS, T. (2001). EMC for Product Designers (3rd ed.)
WINDER, S. (2002). Analog and Digital Filter Design (2nd ed.)
WINDER, S. (2002). Newnes Radio and RF Engineering Pocket Book (3rd ed.)
YU, F. T. S. (2001). Introduction to Information Optics