03-27-2011, 07:30 AM
GEOTECHNICAL DESIGN AND INSTALLATION OF SUCTION ANCHORS IN CLAY
Size: 1 MB | Format: PDF | Publisher: DNV | Year: 2005 | pages: 28
![[Image: 93195478439596802268.jpg]](https://pic.civilea.com/images/93195478439596802268.jpg)
![[Image: info.png]](https://forum.civilea.com/postgen/icon/info.png){kind=icon}
This Recommended Practice is based on the results from the Joint Industry Project “Reliability-Based Calibration of Design Code for Suction Anchors” /1/. This Recommended Practice includes a design code for suction anchors. The design code is recommended by DNV for use in designing suction anchors in clay. The design code is a more formal part of the Recommended Practice in that it specifies requirements, rather than guidance, with respect to which design rules shall be satisfied and which partial safety factors shall be used in the design.
![[Image: Download.png]](https://forum.civilea.com/postgen/icon/Download.png){kind=icon}
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************![[Image: Download.png]](https://forum.civilea.com/postgen/Download.png)
