Civil Engineering Association

Full Version: GUSSET PLATE SCREENING AND ANALYSIS ON THE HAWK FALLS BRIDGE
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
GUSSET PLATE SCREENING AND ANALYSIS ON THE HAWK FALLS BRIDGE

[Image: 31848928547472780433.jpg]

[Image: info.png]
SUMMARY
In the aftermath of the I-35W Bridge collapse in Minnesota, the Federal Highway Administration issued a technical advisory to bridge owners to check the status of gusset plates on similar bridges. In response, the Pennsylvania Turnpike Commission initiated a screening program for the analysis of the Pennsylvania Turnpike’s Hawk Falls Bridge. The 51-year old, 740 ft long bridge spans Mud Run and contains a three-span continuous, haunched Warren deck truss. An analysis of the bridge was performed using BAR7. The gusset plates were grouped into representative types and each type was analyzed considering worst-case loads. A finite element model was developed, which verified the results of the hand calculations, finding some stresses above allowable values, but below material yield strength. A monitoring program was subsequently implemented, and data will be collected through sensors and strain gages for one year to accurately evaluate the bridge and make decisions regarding future rehabilitation.

[Image: Download.png]

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************
1.56MB,13 Pages