11-12-2010, 11:27 AM
Design of Composite Slabs and Beams with Steel Decking
Publisher
Steel Construction Institute
Ascot, UK
Abstract
Presents a method of design consistent with BS 5950: Part 1 and Part 3.1 for simply supported composite beams as used in buildings. A total of 71 design tables for both uniform and point load cases are included to aid selection of steel beam sizes depending on span and loading, depth of the concrete slab and shape of the deck profile used. A worked example illustrates the design of a typical composite beam.
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Moderator Note:
See post:
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************
Regards
Dell Brett