Design of Concrete Buildings for Earthquake and Wind Forces - According to the UBC 97
Current time: 11-16-2018, 02:10 AM
Users browsing this thread: 1 Guest(s)
Author: junaid
Last Post: lisine
Replies 4
Views 4150

Design of Concrete Buildings for Earthquake and Wind Forces - According to the UBC 97
#1
Design of Concrete Buildings for Earthquake and Wind Forces - According to the 1997 UBC

Author: David Anthony Fanella; Javeed A Munshi | Size: 11 MB | Format: PDF | Quality: Scanner | Publisher: Portland Cement Association | Year: 1998 | pages: 185 | ISBN: 0893121959

[Image: 40835505346067473009.jpg]

[Image: info.png]
From the Preface: "...Special emphasis is given to the detailing requirements for a variety of structural componenets in regions of low, moderate, and high seismic risk. The detailed design of three reinforced concrete buildings in high seismic zones utilizing the various structural systems recognized in the 1997 UBC is illustrated. All three buildings are analyzed and designed for the combined effects of gravity, seismic, and wind loads...."

[Image: download.png]
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************



Reply
#2
@oram
The link from the first post is still alive and file available; checked 28.01.2012

[Image: mirror.png]

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************


Regards,
3fan
Always do what you are afraid to do...
[-] The following 18 users say Thank You to 3fan for this post:
  • rezart, llbb, blaze, jcbv, junaid, gulilero, seriousboy, mgdario, Dell_Brett, Jackass, sasan7351, yantonegr, oram, yeka, Nilupa, Quantumm, ykhackhack, bigone
Reply
#3
Mirror Links:
[Image: Download.png]
PDF|ZIP 10.75|10.00 MB(on site)
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[-] The following 14 users say Thank You to kowheng for this post:
  • ssobhan, junaid, lednar_ved, cace-01, mary, Dell_Brett, cristi, 3fan, wanwin, Nilupa, zuhalz, lisine, ykhackhack, bigone
Reply
#4
Comprehend the basic considerations involved in earthquake-resistant design. Included are the seismic design provisions and detailing requirements for structures located in regions of low, moderate, and high seismic activity. This publication outlines the basic considerations involved in earthquake-resistant design according to the provisions of the 1997 Uniform Building Code (UBC). Included is a comprehensive description of the seismic design provisions contained in the 1997 UBC, as well as a chapter devoted to seismic detailing requirements for structures located in regions of low, moderate, and high seismic activity. Comparisons between the requirements of the 1997 UBC and the 1994 UBC are also given. Presented are the designs of a special moment-resisting frame system, a building frame system, and a dual system for combined gravity, earthquake, and wind forces.

Table of Contents
1. Introduction
1.1 Scope
1.2 Major Changes in Earthquake Design Requirements
1.3 Major Changes in Concrete Related Provisions
1.4 References
2. Seismic Design Loads
2.1 Introduction
2.2 Load Combinations
2.3 Criteria Selection
2.4 Minimum Design Lateral Forces and Related Effects
2.5 Detailed System Design Requirements
2.6 References
3. Detailing Requirements
3.1 Introduction
3.2 General Requirements
3.3 Members Subjected to Bending
3.4 Members Subjected to Bending and Axial Load
3.5 Shearwalls
3.6 Diaphragms
3.7 Joints of Frames
3.8 Development Lengths
3.9 Shear Strength Requirements
3.10 Two-Way Slab Without Beams
3.11 Frame Members Not Proportioned to Resist Forces Induced by Earthquake Motions
3.12 References
4. Beam-Column Frame
4.1 Introduction
4.2 Design Data
4.3 Seismic Load Analysis
4.4 Wind Load Analysis
4.5 Gravity Load Analysis
4.6 Design for Combined Load Effects
4.7 References
5. Building Frame System
5.1 Introduction
5.2 Design Data
5.3 Seismic Load Analysis
5.4 Wind Load Analysis
5.5 Gravity Load Analysis
5.6 Design for Combined Load Effects
5.7 Reference
6. Dual System
6.1 Introduction
6.2 Design Data
6.3 Seismic Load Analysis
6.4 Wind Load Analysis
6.5 Gravity Load Analysis
6.6 Design for Combined Load Effects
6.7 References

Mirror Link :

***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************


Mediafire unlock password: nhawe
Regards,
Shadab

"Dream till you Live, Chase till you Die"
[-] The following 5 users say Thank You to shadabg for this post:
  • ranger, ruaumoko, Nilupa, ykhackhack, bigone
Reply
#5


***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

[-] The following 23 users say Thank You to lisine for this post:
  • cace-01, Dell_Brett, malc, ssobhan, ingchio, oanm2000, thanzawtun, gulilero, Jackass, vardan, Quantumm, hignacio43, ykhackhack, PinkPant, draluka, subin91, bigone, rezart, hamex, learner20, bridgeengineer, techno, blaze
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Wind Effects on Buildings and Design of Wind-Sensitive Structures lamkin 5 5,658 12-06-2017, 11:31 AM
Last Post: gulilero
Vibration of Buildings to Wind and Earthquake Loads by Balendra, T gulilero 6 5,296 11-21-2017, 08:28 PM
Last Post: rami1976
Wind Forces in Engineering amindoxiti 1 2,238 09-11-2017, 03:49 AM
Last Post: camto2
Wind Tunnel Studies of Buildings and Structures RyanRS 1 1,610 03-03-2017, 05:47 PM
Last Post: rami1976
Wind and Earthquake Resistant Buildings: Structural Analysis and Design - B Taranath junaid 15 12,740 10-11-2015, 12:39 PM
Last Post: rami1976



Users browsing this thread: 1 Guest(s)