Autocad 2017 (Trial) - Printable Version +- Civil Engineering Association (https://forum.civilea.com) +-- Forum: Software (https://forum.civilea.com/forum-65.html) +--- Forum: Software Product (https://forum.civilea.com/forum-105.html) +---- Forum: Autodesk Products (https://forum.civilea.com/forum-39.html) +---- Thread: Autocad 2017 (Trial) (/thread-52657.html) |
Autocad 2017 (Trial) - BennyP - 03-20-2016 Autocad 2017 (Trial)
Size: 2.24 GB Description The new Autocad version. Links Code: *************************************** Comment
Private Note:
Password Code: *************************************** This post has been made by CivilEA Post-Generator V2.3.1 RE: Autocad 2017 (Trial) - temp1366 - 03-23-2016 (03-23-2016, 07:33 AM)atenx Wrote: Bad luck for me.... Mirror: Code: *************************************** RE: Autocad 2017 (Trial) - TAFATNEB - 03-25-2016 Autodesk AutoCAD 2017 .sfx (64bit)
[*] Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, announced the release of AutoCAD 2017, its the latest version of the popular drafting software features improvements in dimensioning, object snapping, PDF creation, and reality computing. What’s new: - Improve 3D drafting in AutoCAD LT – For all of us that do 2D drafting and design, it’s hard to beat the latest release of AutoCAD LT. But when it comes to 3D features, however, it lacks. Now we know that you can pay a lot more to get 3D versatility in some of Autodesk’s more premium products but for a lot of small businesses that already find LT to be an expensive option, we would love to see more basic 3D options available. - Bring back the Classic Workspace view – If you are a long time user of AutoCAD LT, then you’ll be bummed that the Classic Workspace view is no longer available in the 2016 perpetual version (those on the subscription plan still can switch to it). The new workspace interface is so dramatically different that if you’re upgrading from an older version then you’ll have to commit some time to learning it over again to become efficient with the software. While Autodesk cites their decision to remove the view as a “natural evolution towards a modern and more efficient interface”, we would like to see the option return for those that want it. - Improve digital rights management and support – Autodesk has a really poor licensing management setup and nearly no support available if you get stuck activating your new. In the 2016 release, we found a number of customers complaining that they could not activate their new licenses using their existing account Autodesk ID’s when trying to install the software using “I already have an Autodesk account” installation option. The only workaround was to remove any trial versions of the software and reinstalling it under a newly created Autodesk ID. We hope that once the 2017 version rolls in that they will improve this setup process. [*] Code: *************************************** [*]
Private Note:
[*] Code: *************************************** This post has been made by CivilEA Post-Generator V2.3.1
Autodesk AutoCAD 2017 .sfx (64bit)
[*] Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, announced the release of AutoCAD 2017, its the latest version of the popular drafting software features improvements in dimensioning, object snapping, PDF creation, and reality computing. What’s new: - Improve 3D drafting in AutoCAD LT – For all of us that do 2D drafting and design, it’s hard to beat the latest release of AutoCAD LT. But when it comes to 3D features, however, it lacks. Now we know that you can pay a lot more to get 3D versatility in some of Autodesk’s more premium products but for a lot of small businesses that already find LT to be an expensive option, we would love to see more basic 3D options available. - Bring back the Classic Workspace view – If you are a long time user of AutoCAD LT, then you’ll be bummed that the Classic Workspace view is no longer available in the 2016 perpetual version (those on the subscription plan still can switch to it). The new workspace interface is so dramatically different that if you’re upgrading from an older version then you’ll have to commit some time to learning it over again to become efficient with the software. While Autodesk cites their decision to remove the view as a “natural evolution towards a modern and more efficient interface”, we would like to see the option return for those that want it. - Improve digital rights management and support – Autodesk has a really poor licensing management setup and nearly no support available if you get stuck activating your new. In the 2016 release, we found a number of customers complaining that they could not activate their new licenses using their existing account Autodesk ID’s when trying to install the software using “I already have an Autodesk account” installation option. The only workaround was to remove any trial versions of the software and reinstalling it under a newly created Autodesk ID. We hope that once the 2017 version rolls in that they will improve this setup process. [*] Code: *************************************** [*]
Private Note:
[*] Code: *************************************** This post has been made by CivilEA Post-Generator V2.3.1
Autodesk AutoCAD 2017 .sfx (64bit)
[*] Autodesk Inc., a world leader in 3D design software for entertainment, natural resources, manufacturing, engineering, construction, and civil infrastructure, announced the release of AutoCAD 2017, its the latest version of the popular drafting software features improvements in dimensioning, object snapping, PDF creation, and reality computing. What’s new: - Improve 3D drafting in AutoCAD LT – For all of us that do 2D drafting and design, it’s hard to beat the latest release of AutoCAD LT. But when it comes to 3D features, however, it lacks. Now we know that you can pay a lot more to get 3D versatility in some of Autodesk’s more premium products but for a lot of small businesses that already find LT to be an expensive option, we would love to see more basic 3D options available. - Bring back the Classic Workspace view – If you are a long time user of AutoCAD LT, then you’ll be bummed that the Classic Workspace view is no longer available in the 2016 perpetual version (those on the subscription plan still can switch to it). The new workspace interface is so dramatically different that if you’re upgrading from an older version then you’ll have to commit some time to learning it over again to become efficient with the software. While Autodesk cites their decision to remove the view as a “natural evolution towards a modern and more efficient interface”, we would like to see the option return for those that want it. - Improve digital rights management and support – Autodesk has a really poor licensing management setup and nearly no support available if you get stuck activating your new. In the 2016 release, we found a number of customers complaining that they could not activate their new licenses using their existing account Autodesk ID’s when trying to install the software using “I already have an Autodesk account” installation option. The only workaround was to remove any trial versions of the software and reinstalling it under a newly created Autodesk ID. We hope that once the 2017 version rolls in that they will improve this setup process. [*] Code: *************************************** [*]
Private Note:
[*] Code: *************************************** This post has been made by CivilEA Post-Generator V2.3.1
Post Edited by Moderator (in 3 times): Link code protected inside Comments RE: Autocad 2017 (Trial) - BennyP - 03-25-2016 I am drunk or you add 3 posts of Autocad 2017 with the description of Autocad LT ? If you didn't know this is the reason you an user with 756 posts aren't a VIP. RE: Autocad 2017 (Trial) - rami1976 - 04-16-2016 Accumulated hotfix 1 for AutoCAD 2017 based products
The following issues are addressed by this hotfix: - Layers of Xrefs that are frozen in viewports are plotting ellipses. - In some languages the model documentation commands are not working. - The number of hits for GetLineContainment is incorrectly counted. - Xrefs show as needing reloading when opened from a network path to a shared folder. Code: ***************************************
Private Note:
|