Minimum Foundation Mass for Vibration Control (W/ Discussion & Closure)

Minimum Foundation Mass for Vibration Control (W/ Discussion & Closure) - Printable Version

+- Civil Engineering Association (https://forum.civilea.com)
+-- Forum: eBooks (https://forum.civilea.com/forum-63.html)
+--- Forum: Journals, Papers and Presentations (https://forum.civilea.com/forum-74.html)
+--- Thread: Minimum Foundation Mass for Vibration Control (W/ Discussion & Closure) (/thread-42883.html)

Minimum Foundation Mass for Vibration Control (W/ Discussion & Closure) - asim99 - 04-24-2013

This note utilizes the analog models of forced vibration to express the mass of foundation block in terms of damping ratio and
thereafter obtains the expression for the minimum foundation mass required to limit vertical machine vibration amplitude to a prescribed
limit. The resulting formula, which accounts for internal damping, is constrained by the limitations of the original analog solutions.
Moreover, formulas are derived for determining the damping ratio for conditions different from optimum that enable the evaluation of the
nonoptimum foundation mass required to limit vibration. Since the ideal optimum solution may not be practical, an expression has been
derived for the best nonoptimum foundation mass. The method presented in this note is believed to be easier to implement and to yield
smaller foundation blocks than the existing traditional method, and thus will enable cheaper machine foundations to be constructed. It is
believed that the proposed optimal solution may lead to the near elimination of machine vibration nuisance produced by high-frequency
machines during operation

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator v2.2.0