+- Civil Engineering Association (https://forum.civilea.com)
+-- Forum: eBooks (https://forum.civilea.com/forum-63.html)
+--- Forum: Journals, Papers and Presentations (https://forum.civilea.com/forum-74.html)
+--- Thread: ACI Span/Thickness Limits for Deflection Control (/thread-36117.html)
ACI Span/Thickness Limits for Deflection Control - miquan - 05-15-2012
Span/Thickness Limits for Deflection Control
Author: Noel J. Gardner | Size: 1 MB | Format: PDF | Quality: Original preprint | Publisher: ACI | Year: 2011 | pages: 8
![[Image: 20961093573328128398.png]](https://pic.civilea.com/images/20961093573328128398.png)
![[Image: info.png]](http://postgen.civilea.com/icon/info.png){kind=icon}
Predicting the deflection serviceability of reinforced concrete members is fraught with uncertainties, which include imperfect knowledge of the limiting serviceability criteria, the material properties, and the load history including construction loads and the service load. The serviceability criteria can be immediate deflection/curvature or incremental deflection/curvature. Most codes offer two methods for control of deflections. The designer may choose to calculate the deflections and check that these computed deflections are less than specified allowable limits. Alternatively, the codes give specified maximum span-depth ratios for which serviceability can be assumed to be satisfied and deflections do not need to be calculated. This paper compares the deemed-tocomply span/thickness limits of ACI 318-08, CSA A23.3-04, BS 8110-97, AS 3600-2009, Eurocode 2 (2004), ACI Committee 435 revisions, and the proposals of numerous other authors.
![[Image: download.png]](http://postgen.civilea.com/icon/download.png){kind=icon}
Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:
http://forum.civilea.com/thread-27464.html
***************************************