Civil Engineering Association
[HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 - Printable Version

+- Civil Engineering Association (https://forum.civilea.com)
+-- Forum: Software (https://forum.civilea.com/forum-65.html)
+--- Forum: Software Installation Problems & Bugs (https://forum.civilea.com/forum-106.html)
+---- Forum: Archive Problem (https://forum.civilea.com/forum-28.html)
+---- Thread: [HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 (/thread-12463.html)



[HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 - anez_regar - 05-29-2010

[help]

i have problem with NonLinear Dynamic analysis using SAP2000 v14.1.
for modeling non linear column and beam, im using nonlinear Hinge in both side. hinge M3 for beam and hinge PMM for column. then i put Time history acceleration as dynamic loading.

when i analyze the result,
(for column)
[Image: 51570615271915468832_thumb.jpg]
(for beam)
[Image: 33517655890424508243_thumb.jpg]

my questions are:
1. is my method right? using hinge to model non linearity of frame?
2. there is another method to model it?
3. Hinge from FEMA (displacement control) can use for Non Linear Dynamic analysis? because my column elements are never yield even it reach its capacity.

please help me and give me suggestion how to solve them.

thanks.


RE: [HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 - ivanveliki - 05-29-2010

Could you upload your model?


RE: [HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 - NAUTILUS87 - 05-29-2010

Dear anez_regar ,

you may upload your Etabs file so that we can see what is the problem .

with regards
Nautilus87


RE: [HELP] NonLinear Dynamic Analysis using SAP2000 v14.1 - anez_regar - 05-30-2010

sorry forgot to upload my model.

Code:
***************************************
Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html
***************************************

please correct me if i wrong..
thanks.

regards,
Anez_regar