Civil Engineering Association

RAM Concept V8i 5.0.1 SELECTSeries 7

Size: 148.26 MB

Version: 05.00.01.04 Date: 10/12/2012

RAM Concept is an analysis and design program that uses
the finite element method for elevated concrete floor
systems, or mat foundations. The floors or mats can be
post-tensioned concrete (PT), reinforced concrete (RC), or
hybrid (a mixture of PT and RC). Concept is extremely
powerful and allows you to design an entire floor in one
model, or design individual strips or beams.

In this context, the term “design” means that:
• The user defines the following: structural geometry,
loads, load combinations, and post-tensioning layout (if
applicable).

• Concept calculates (for any number of load combinations):
the required amount of reinforcement for flexure
and one-way shear according to relevant code requirements;
the stud shear reinforcement (SSR) for punching
shear, stresses for flexure, and deflections.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Private Note:

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

IMPORTANT NOTICE: You may use this software for evaluation purposes only.
If you like it, it is strongly suggested you buy it to support the developers.
By any means you may not use this software to make money or use it for commercial purpose.

Mirror RAM Concept V8i 5.0.1 SELECTSeries 7 - Size: 148.26 MB (Install File)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Mirror RAM Concept V8i 5.0.1 SELECTSeries 7 - Size: 148.26 MB (Install File)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

RAM Concept V8i
(Version: 05.00.02.12 Date: 2/12/2013 FileSize: 148.37 MB)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

RAM Concept V8i
(Version: 05.01.01.10 Date: 2/4/2014 FileSize: 220.85 MB)

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

RAM Concept V8i SELECTseries 8, r5.1.1, Release Notes
Release Date: February 4, 2014
Installation Instructions:

RAM Concept V8i Release 5.1.1 can be installed side-by-side with previous release versions of Concept. There is no need to uninstall previous release versions.

Error Corrections in RAM Concept V8i Release 5.1.1
RAM Concept V8i Release 5.1.1 is a patch, containing error corrections and minor enhancements. Each issue addressed is summarized below.

Audit Design Section
When the user attempted to audit a cross section generated by a design section, an error with the message “Program Error (Report Parsing Error: bad master node contents)” resulted.

Large Calc Log

RAM Concept became unresponsive when the calc log had a large amount of output.

DXF Import

The import of a dxf file with missing xrefs into RAM Concept caused a program crash in specific and rare instances.

ASCE 7-10 Wind Import

When working with lateral loads that were imported from RAM Structural System, RAM Concept always treated wind loads as service loads, even when they might be ultimate level loads.

Pre-Concept V8i Release 5.1 File Compatibility Warning:

RAM Concept V8i Release 5.1 can read all previous file formats, but writes files in a format that cannot be read by previous versions.

32 bit

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

64 bit

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Bentley.RAM.Concept.V8i.SS9.v05.02.00.21.x86.x64
RAM Concept 5.2 Release Notes

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

32 bit

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

64bit

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

LAVteam crack attached

RAM Concept V8i v05.02.01.10
[Image: 56178539487228040588.png]

32 bit
size 215.6 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

attached

RAM Concept V8i v05.02.01.10
64 bit
size: 237.0 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Bentley RAM Concept V8i SS9 05.02.01.10 build 02/04/2015

(x86 & x64)
Size: 454.9 MB

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

BennyP

joker™

joker™

joker™

bigone

bigone

bigone

bigone

joker™