Civil Engineering Association

Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading

This paper presents finite-element FE modeling and nonlinear analysis of steel-concrete composite frames subjected to very
large cyclic loading. A three-dimensional FE model is developed to carry out the nonlinear analysis. Modeling details of the steel frame,
the reinforced concrete RC slab, the interactions between the RC slab and the frame beams, and the associated constitutive relationships
for cyclic loading are presented. A composite frame previously tested by the writers is analyzed using the proposed FE model. Good
correlation is observed between the experimental and analytical hysteresis curves up to rotation amplitude of 0.04 rad. One of the notable
observations during the loading to large rotations is the fracture at steel beam ends. To simulate such behavior, a simplified fractured steel
connection model is introduced. The proposed nonlinear model is found to be capable of capturing the fracture behavior of beam ends to
an acceptable accuracy.

Code:
***************************************

Content of this section is hidden, You must be registered and activate your account to see this content. See this link to read how you can remove this limitation:

http://forum.civilea.com/thread-27464.html

***************************************

This post has been made by CivilEA Post-Generator ver 2.1.6

jamildear4u